Frame and Metric Conventions
Introduction
In this article a frame means a spacetime frame: a choice of coordinates on the biquaternion space. There are two, the $\mathbb{B}$ frame and the $\mathbb{B}_{\Phi}$ frame, and every display in the series is written in one of them. A reader who mixes the two changes a sign or a factor of $i$ and has no way to see it in the result.
The word metric has one meaning in the series. There is one metric, the unit metric $\delta_{\mu\nu}=(1,1,1,1)$: diagonal, all four coefficients $+1$, the matrix of the interval $\sum_\mu Q_\mu^2$. A frame carries a coordinate, not a metric. The minus of the material sector is not a metric: it is $i^2=-1$ in $Q_t=i q'_t$, made once on the time.
This article fixes the general notion first, then the two coordinate frames. The $\mathbb{B}$ frame is the general frame of the biquaternion universe, and its metric is the unit metric, $\delta_{\mu\nu}=(1,1,1,1)$, the same one the two sectors carry. The $\mathbb{B}_{\Phi}$ frame is a particular case of it on the material sector, kept to display familiar equations in their usual form; there the interval is $-{r'_{t}}^2+r_x^2+r_y^2+r_z^2$, and its one minus is the square of the $i$ in $Q_t=i q'_t$. It then gives the Clifford map, which translates those directions into $M_4(\mathbb{C})$ and is a dictionary rather than a structure of the algebra, and it closes with the rules that keep them apart.
Each frame is fixed with its coordinate. The coordinate is part of the frame, not a separate choice; there is one metric, $\delta_{\mu\nu}=(1,1,1,1)$. The plain weight belongs to the product and is the same in both frames.
The article is read after Algebra and Element Conventions and before Matrix Representations Conventions. It uses no left or right multiplication and no explicit array.
The order is the order of dependence, and it is also the order of risk. The coordinate frame decides the signs of every interval term. A mistake in it propagates into every display of the article that follows.
What a Frame Is
A frame is a choice of coordinate, not a part of the object. It is a rule that turns an element into four labelled components, together with a stated law for passing to another such rule. The object is what the rule leaves fixed. The coordinate is part of the frame, not a choice made after it: each of the two frames carries its interval, and the two intervals differ by the one $i$ inside a coefficient, while the metric is $\delta_{\mu\nu}$ in both. The test of a frame statement is that it names the frame and its coordinate; the test of an invariant statement is that it does not. A coordinate taken from one frame and read in the other is an object of neither, and no algebraic check detects it.
The two coordinate frames have names. The names are read $\mathbb{B}$ for biquaternion and $\mathbb{B}_{\Phi}$ for the material sector. The $\mathbb{B}$ frame is the biquaternion space read in its own complex coordinate: the natural complete frame, with no reality condition and all four directions on the same footing. The $\mathbb{B}_{\Phi}$ frame is the material real frame, named for the sector it is defined on, reached by one substitution, $Q_t=i q'_t$, in both the physics and the mathematics articles, since the coefficient letter no longer differs between them and $q'_t$ takes the value of the material time. $Q_\mu$ stays the name of the complex coordinate and $x_\mu$ the name of the real one; the frame name and the coordinate name are separate. The coefficient letters are $q$, $Q_\mu=q_\mu+iq'_\mu$ throughout the series, so the material reading is $Q_t=i q'_t$ and $Q_\eta=q_\eta$, with $q'_t=r'_t$ the material time, written $x_0$ in the real chart, and $q_\eta=r_\eta$ the material space, written $x_\eta$. No $r$ attaches to $Q$. The four values of the map carry the index low and no frame label: they are one set of arrays, the same in both frames, and the arrays themselves are displayed in §The Clifford Map. The frame is named on the coordinate, $Q_\mu$ or $x_\mu$, and never on the array.
The frame and the invariant are read together. The plain weight is an invariant: $\mathrm{Sc}(e_t^2)=+1$ and $\mathrm{Sc}(\vec e_\eta^2)=-1$ hold in both frames, so $\varepsilon=(1,-1,-1,-1)$ belongs to the product and not to a frame. What a frame supplies is the coordinate, and the coordinate alone fixes the interval. There is one metric, $\delta_{\mu\nu}$, and it is the same in both frames. The weight and the metric are two objects, and no sentence needs both to be read.
A change of frame is a substitution with a law. On the material sector it is $Q_t=i q'_t$ and $Q_\eta=q_\eta$ for $\eta=1,2,3$, with the inverse $x_0=-iQ_t$ and $x_\eta=Q_\eta$. A display is read only in the frame that produced it, and the substitution is written wherever a display passes from one frame to the other.
The $\mathbb{B}$ Frame
The coordinate is complex. The $\mathbb{B}$ frame is the biquaternion space read in its own complex coordinate: the natural complete frame. It reads the four coefficients of the element and imposes no reality condition, $$ \tilde Q=Q_t\,e_t+Q_x\,\vec e_x+Q_y\,\vec e_y+Q_z\,\vec e_z,\qquad Q_\mu\in\mathbb{C}. $$ This is the general case. The two real sectors are conditions on these four coefficients, not other frames.
The interval has four $+1$ coefficients. With the quaternion conjugation $\natural$, $$ \langle\tilde Q\rangle_\natural=\tilde Q\tilde Q^\natural=Q_t^2+Q_x^2+Q_y^2+Q_z^2 . $$ Every coefficient is $+1$, and the value is complex in general. The tuple is a coefficient tuple, not a real sign pattern; signs appear only when a sector is imposed. On $\mathbb{B}_{\Phi}$, with $Q_t=i q'_t$ (that is $q'_t=r'_t$), the value is $-{r'_{t}}^2+r_x^2+r_y^2+r_z^2$; on $\mathbb{B}_{\Psi}$, with $Q_t=q_t$ and $Q_\eta=i q'_{\eta}$ (that is $q_t=h_t$ and $q'_\eta=h'_{x_\eta}$), it is $h_t^2-{h'_{x}}^2-{h'_{y}}^2-{h'_{z}}^2$. The metric is $\delta_{\mu\nu}=(1,1,1,1)$, and on $\mathbb{B}_{\Phi}$ the interval is still the plain sum $\sum_\mu Q_\mu^2$, read on the complex coefficient $Q_t=i q'_t$.
The general frame, and its form is Euclidean. The $\mathbb{B}$ frame is the frame of the biquaternion universe itself, not of one sector of it; the $\mathbb{B}_{\Phi}$ frame is this one read on a sector. Its form is $\sum_\mu Q_\mu^2$, with all four coefficients $+1$. On real coefficients that is the ordinary Euclidean metric: positive definite, with no direction singled out by a sign. The coefficients are complex in general, so the form is the complexified Euclidean form; real signs appear only when a sector is imposed. A Lorentzian sign pattern is not a property of this frame.
The metric is the identity, and it is the same in both frames. It is $\delta_{\mu\nu}=(1,1,1,1)$, so the interval is the plain sum $\sum_\mu Q_\mu^2$ and no direction is singled out by a sign. No array enters the frame: the arrays belong to Matrix Representations Conventions, and the squares of their four values are the same in both frames. What separates the two frames is the coordinate that reads an interval, not the squares.
The material case. On $\mathbb{B}_{\Phi}$ the coefficients are $$ Q_t=i q'_t,\qquad Q_x=q_x,\qquad Q_y=q_y,\qquad Q_z=q_z , $$ with $q'_t=r'_t$ and $q_\eta=r_\eta$ real and all four in metres. This is the coordinate the physics corpus writes by default. It is a sector condition on the $\mathbb{B}$ frame, not the definition of the frame.
The $\mathbb{B}_{\Phi}$ Frame
The coordinate. The $\mathbb{B}_{\Phi}$ frame is the material coordinate, defined on $\mathbb{B}_{\Phi}$, $$ x_0=r'_{t},\qquad x_1=r_x,\qquad x_2=r_y,\qquad x_3=r_z , $$ with $r'_t,r_\eta$ real. On the material case $Q_t=i q'_t$ and $Q_\eta=q_\eta$ for $\eta=1,2,3$: one substitution, a rotation of the time axis by $i$.
A particular case, kept for convenience. The $\mathbb{B}_{\Phi}$ frame is the $\mathbb{B}$ frame restricted to $\mathbb{B}_{\Phi}$, not a second universe and not a second algebra. It is defined only after the coefficients have been put on that sector, and its one change is the time coordinate: $Q_t=i q'_t$ becomes the real $x_0=r'_{t}$, so a display writes $r'_t$ with no $i$ attached. The $i$ does not disappear; its square becomes the sign of the time term, $i^2=-1$, so the interval reads $-{r'_{t}}^2+r_x^2+r_y^2+r_z^2$ with real coefficients, and the metric is still $\delta_{\mu\nu}$. Nothing is chosen a second time, and no matrix is needed: $Q_t=i q'_t$ is the change of frame. The purpose of the frame is display: to write familiar equations in their familiar shape, with a real time and one minus on the time term. Nothing is added to the content, and the same equation is read in the notation of the textbooks.
The interval carries one minus, and the minus is the square of the $i$. On $\mathbb{B}_{\Phi}$ the same interval reads $$ -x_0^2+x_1^2+x_2^2+x_3^2 , $$ with one minus on the time term and none on the space. The minus is not a declared sign: it is the square of the $i$ in $Q_t=i q'_t$, written once in the coordinate and read once here. The sign is now explicit in the coordinate, and no metric is written. The frame fixes the interval; it does not offer a choice of interval. Read on $\mathbb{B}_{\Phi}$, this is the interval of the two real sectors; on $\mathbb{B}_{\Psi}$ the same form is read on the informational coordinate, where the minuses sit on the space.
The squares are the same in both frames. $$ \mathrm{Sc}(e_t^2)=+1,\qquad \mathrm{Sc}(\vec e_\eta^2)=-1,\qquad \mathrm{Sc}(e_\mu e_\nu)=\varepsilon_\mu\delta_{\mu\nu} , $$ with $\varepsilon=(1,-1,-1,-1)$ the plain weight. The split is in the weight, not in the frame: the same two squares hold in both, and the time direction is the one the weight leaves positive.
The Two Frames Side by Side
Each column uses its own coordinate; the $\mathbb{B}$ column is the general frame, and the material case is named inside it.
| $\mathbb{B}$ frame | $\mathbb{B}_{\Phi}$ frame | |
|---|---|---|
| coordinate | $Q_\mu\in\mathbb{C}$; on $\mathbb{B}_{\Phi}$, $Q_t=i q'_t$ | the same $Q_\mu$; on $\mathbb{B}_{\Phi}$, $x_0=r'_{t}$ and $Q_t=i q'_t$ |
| interval $\sum_\mu Q_\mu^2$ | coefficients $(1,1,1,1)$; complex in general | $-{r'_{t}}^2+r_x^2+r_y^2+r_z^2$ on $\mathbb{B}_{\Phi}$ |
| metric | $\delta_{\mu\nu}=(1,1,1,1)$ | $\delta_{\mu\nu}=(1,1,1,1)$ |
| plain weight $\varepsilon$ | $(1,-1,-1,-1)$ | $(1,-1,-1,-1)$ |
| squares of the four units | $\mathrm{Sc}(e_t^2)=+1$ and $\mathrm{Sc}(\vec e_\eta^2)=-1$, that is $\varepsilon$ | the same, that is $\varepsilon$ |
There is one metric and one weight, and the two frames differ in the coordinate. The metric is $\delta_{\mu\nu}=(1,1,1,1)$ in both frames, and it is the coefficient tuple of the interval $\sum_\mu Q_\mu^2$. In the $\mathbb{B}_{\Phi}$ frame the interval still has every coefficient $+1$ in the $Q$'s; written in the real coordinate it reads $-{r'_{t}}^2+r_x^2+r_y^2+r_z^2$, and the one minus is the $i$ of $Q_t=i q'_t$, which is $i^2=-1$ on the time slot. The plain weight $\varepsilon=(1,-1,-1,-1)$ is the square of the units, the same in both frames, and it is not the metric. A reader who carries the weight from one frame to the other as if it were the interval gets a sign that no algebra check will catch.
One metric, and neither real sector adds one. The metric is $\delta_{\mu\nu}=(1,1,1,1)$, the coefficient tuple of $\sum_\mu Q_\mu^2$, and a sector is a condition on the four coefficients, not another frame: $\mathbb{B}_{\Phi}$ makes $Q_t$ imaginary, so its one minus is the square of one $i$; $\mathbb{B}_{\Psi}$ makes the three space coefficients imaginary, so its three minuses are the squares of three $i$'s. Neither touches the metric. A metric that differed on one sector would be a second object, and there is none. The sign a reader sees belongs to the coordinate the square was taken in, not to the metric.
The $i$ is never put into the metric. The one metric, $\delta_{\mu\nu}$, has real coefficients everywhere. What changes is which coordinate carries the $i$: on the material case it is $Q_t$, in the $\mathbb{B}_{\Phi}$ frame it is none. A metric with an $i$ in it is not a metric of this series.
The substitution is the material one. $Q_t=i q'_t$ is made on $\mathbb{B}_{\Phi}$. The informational sector has real time and imaginary space, $\tilde H_\Psi=h_t\,e_t+i(h'_{x}\vec e_x+h'_{y}\vec e_y+h'_{z}\vec e_z)$, and it is not obtained by the same substitution. An article that writes both sectors states which coordinate belongs to which.
The Clifford Map
A dictionary, not a map of the biquaternion environment. The Clifford map is not a structure of $\mathbb{B}$. Its source is not the algebra and its target is not the algebra: the source is the four directions of one chosen frame, and the target is $M_4(\mathbb{C})$. Nothing in the multiplication of $\mathbb{B}$ produces it. It is kept here for one reason: the physics papers are written in gamma matrices, and a reader who comes from them needs the translation. The four arrays are displayed in this section and nowhere else in the article; the rest of the article writes the coordinate, the interval and the weight, and cites this section for them. It is cited, not assumed; a display that uses it declares it.
What the framework does instead is change the frame. Physics is studied here by choosing a coordinate frame, not by choosing matrices. In the general case the frame is $\mathbb{B}$ itself, the four coefficients $Q_\mu\in\mathbb{C}$ with the interval $\sum_\mu Q_\mu^2$. In the material sector the frame is the real frame of $\mathbb{B}_{\Phi}$, reached by $Q_t=i q'_t$, and that change of frame carries the physics. The map translates the change into matrices; it does not produce it.
The map and its values. The four directions of a frame go to the four matrices, and the map is one map for both frames: $$ \mathsf{K}(e_\mu)=\gamma_\mu . $$ Its values are fixed by the anticommutator, $$ \{\gamma_\mu,\gamma_\nu\}=2\varepsilon_\mu\delta_{\mu\nu}I_4,\qquad \varepsilon=(1,-1,-1,-1), $$ and it is linear over the complex field in either frame. The two squares are $\gamma_0^2=+I_4$ and $\gamma_\eta^2=-I_4$ in both frames, and that is the weight written in the arrays. Earlier versions called the five images the gamma frame; this article names the map the Clifford map, because the object is a map and not a frame, and calls the five the gamma set. The letter $\gamma$ stays for the four images.
The image is four-dimensional and not closed. Four elements span four dimensions, and $M_4(\mathbb{C})$ has sixteen. A product of two distinct images is a bivector, and it leaves the image. The image is a subspace, not a subalgebra, and not a basis: the basis is the sixteen graded products, $1+4+6+4+1$. Writing the four as "the basis" hides both the count and the place each product lands.
The weight is read from the map, and the metric is not. The map carries one weight, $4\varepsilon_\mu\delta_{\mu\nu}=\operatorname{tr}\bigl(\mathsf{K}(e_\mu)\mathsf{K}(e_\nu)\bigr)$ in the defining representation, and that weight is the same in both frames. The metric is not a second object of the frame: there is one, $\delta_{\mu\nu}=(1,1,1,1)$, it is the coefficient tuple of the interval $\sum_\mu Q_\mu^2$, and it is the same in both frames. The two are written with two symbols because they are two objects; an article that used one for the other would be wrong in sign and would look right.
The change of frame is the substitution, and it is written once. On the material sector it is $Q_t=i q'_t$ and $Q_\eta=q_\eta$. No matrix is written for it: a matrix here would be a second object carrying a diagonal, and the diagonal was never the content. The metric does not follow from a matrix and does not need to: it is $\delta_{\mu\nu}$ before the substitution and $\delta_{\mu\nu}$ after it. The matrices do not follow either: $\gamma_\mu$ is one array, not one array per coordinate, and the substitution leaves it alone. A display that changes frame writes $Q_t=i q'_t$ once; it does not restate the matrices.
The fifth is a product, not a direction. The fifth is the product $i\gamma_0\gamma_1\gamma_2\gamma_3$ of the frame's four images, so it is fixed by them and is not a fifth image of the map. Being a product and not a direction, it carries no frame label: a label there would read as an argument. The glyph is $\gamma_5=i\gamma_0\gamma_1\gamma_2\gamma_3$ with $\gamma_5^2=I_4$, and it names one operator. It differs from the volume element of the frame, which is the same product without the phase $i$, and the two are written as two glyphs and not one.
One map, one weight. The four matrices are the same in both frames, so an article never chooses between two maps: it chooses a coordinate, and the coordinate alone fixes the interval. There is one metric, $\delta_{\mu\nu}$. A display that writes a metric of its own has invented a second one, and no algebraic check detects it.
The Rules
Nine rules follow.
- Declare the frame before the first display. A formula that does not name its frame is read in the article's declared default, and an article declares one default only.
- One product, one coordinate. A product is read in one frame's coordinate, and the coordinate fixes the interval. The metric is one, $\delta_{\mu\nu}=(1,1,1,1)$, and it is the same in both frames. The matrices carry no frame and are never relabelled.
- The index is low, and it labels a direction. The index names which of the four directions is read; it is not a tensor slot, and no label is raised on the array itself, because a contravariant index is not allowed anywhere in the series: the weight does that work, $\gamma_\mu\gamma_\mu=\varepsilon_\mu I_4$. The fifth is a product and not an image of a direction, so it is written $\gamma_5$ without a label.
- Name the frame with its coordinate. The coordinate frame carries its interval. A statement that names a frame names the coordinate it reads; an interval is never moved from one frame to another.
- The $i$ is in the coordinate or in the signs, never in the metric. The one metric has real coefficients.
- $Q_t=i q'_t$ is material. The substitution is made on $\mathbb{B}_{\Phi}$ and is not carried to $\mathbb{B}_{\Psi}$ without saying so.
- A change of frame is a written substitution. It has a law, $Q_t=i q'_t$ in the coordinates, and the article gives it. The frame is named on the coordinate and no metric is written, because the substitution carries the interval at once. A display is read only in the frame that produced it. The substitution does not touch the matrices.
- The interval is a norm, not a metric. The interval of an element is squared by multiplying it by its conjugate, $\langle\tilde X\rangle_\natural=\tilde X\tilde X^\natural$. In the $\mathbb{B}$ frame this is the plain sum $\sum_\mu Q_\mu^2$, with every coefficient $+1$. In the $\mathbb{B}_{\Phi}$ frame the interval is $-{r'_{t}}^2+r_x^2+r_y^2+r_z^2$: one minus, the square of the one $i$ of $Q_t=i q'_t$, which is $i^2=-1$ on the time slot. The minus is the $i$ squared, not a declared sign, and no metric is written in either frame. The weight is not the negative of a metric: it records the square of each unit, and it is the same in both frames. The letter $\eta$ is never the metric.
- The word signature is not used, and the metric has no signature to carry. There is one metric, $\delta_{\mu\nu}=(1,1,1,1)$, its four coefficients are $+1$, and an object with four equal coefficients has nothing to sign. The signs a reader meets belong to the coordinate, $i^2=-1$ in $Q_t=iq'_t$, and to the plain weight $\varepsilon$ of the product; neither is carried by the metric. What is counted is named directly. The inertia of a form is the triple $(n,m,r)$ of its positive, negative and null directions, and the integer $\sigma=n-m$ is the excess of the positive over the negative directions. A metric, an interval and a norm therefore take no such word at all, and a sentence that needs one is a sentence that has attached a count to the wrong object.
The plain weight is not a metric. $\varepsilon=(1,-1,-1,-1)$ follows from the multiplication of the units, $\mathrm{Sc}(e_t^2)=+1$ and $\mathrm{Sc}(\vec e_\eta^2)=-1$. It belongs to the product, it is the same in both frames, and no frame changes it or raises it.
The calculus is not a frame rule. It belongs to Operator and Calculus Conventions. The frame supplies the coordinate and the interval, and the index stays low in both frames.
Summary
The word frame here means a spacetime frame: a choice of coordinates on the biquaternion space. There are two, $\mathbb{B}$ and $\mathbb{B}_{\Phi}$, and each carries its interval as part of the choice. The metric is one, $\delta_{\mu\nu}=(1,1,1,1)$, the same in both.
The $\mathbb{B}$ frame is the biquaternion space read in its own coordinate, $Q_\mu\in\mathbb{C}$: the natural complete frame, the general frame of the biquaternion universe, with interval coefficients $(1,1,1,1)$, the Euclidean form, and no reality condition. The material case is $Q_t=i q'_t$, $Q_\eta=q_\eta$, and there the interval is the Minkowski one. The $\mathbb{B}_{\Phi}$ frame is a particular case of it, kept for convenience: the material real frame, $x_0=r'_{t}$ on $\mathbb{B}_{\Phi}$, where the interval reads $-{r'_{t}}^2+r_x^2+r_y^2+r_z^2$; the time direction is the one the weight leaves positive. On the material case the two differ by $Q_t=i q'_t$.
The metric is one, and it is the tuple of the interval in the $Q$'s: $\delta_{\mu\nu}=(1,1,1,1)$ with $\sum_\mu Q_\mu^2=Q_t^2+Q_x^2+Q_y^2+Q_z^2$. In the $\mathbb{B}_{\Phi}$ frame the same interval reads $-x_0^2+x_1^2+x_2^2+x_3^2$, and the one minus is the $i$ of $Q_t=i q'_t$, which is $i^2=-1$ on the time slot. The plain weight $\varepsilon=(1,-1,-1,-1)$ is a different object: it belongs to the product and is the same in both frames. Naming the frame and its coordinate together is what keeps a sign from moving silently.
The Clifford map carries the directions, not a basis. It sends the four directions of a frame into $M_4(\mathbb{C})$; its image is four-dimensional and not closed, and its products leave it. It is a dictionary for the physics literature, not a map of $\mathbb{B}$: the framework studies physics by the change of frame, $\mathbb{B}$ in the general case and the real frame of $\mathbb{B}_{\Phi}$ in the material case. The base change is the substitution $Q_t=i q'_t$, written once, and the interval is read in the new coordinate after it.
The word is not used, and there is nothing for it to name. The one metric has four coefficients $+1$; a count of directions is the inertia $(n,m,r)$ of a form, and the single integer is the excess $\sigma=n-m$.
Summary of Notation
| Symbol | Meaning |
|---|---|
| $Q_\mu$ | The $\mathbb{B}$-frame coordinate, $Q_\mu\in\mathbb{C}$; material case $Q_t=i q'_t$, $Q_\eta=q_\eta$; interval coefficients $(1,1,1,1)$ |
| $x_\mu$ | The coordinate of the $\mathbb{B}_{\Phi}$ frame, on $\mathbb{B}_{\Phi}$, $x_0=r'_{t}$, $x_\eta=r_\eta$; $Q_t=i q'_t$, so the interval reads $-{r'_{t}}^2+r_x^2+r_y^2+r_z^2$ |
| $\varepsilon=(1,-1,-1,-1)$ | The plain weight, $\mathrm{Sc}(e_\mu e_\nu)=\varepsilon_\mu\delta_{\mu\nu}$; the same in both frames |
| $\langle\tilde Q\rangle_\natural=\sum_\mu Q_\mu^2$ | The quaternionic interval; coefficients $\delta_{\mu\nu}=(1,1,1,1)$ in the $Q$ coordinate (complex in general), and $-{r'_{t}}^2+r_x^2+r_y^2+r_z^2$ read on $\mathbb{B}_{\Phi}$ |
| $\delta_{\mu\nu}$ | The unit metric, the one metric of the series: diagonal, $(1,1,1,1)$ on the four $Q_\mu$, the same on the general frame and on the two real sectors |
| $(n,m,r)$ | The inertia of a form: its counts of positive, negative and null directions, positive counted first |
| $\sigma=n-m$ | The excess of a form: the positive count less the negative one |
| $\gamma_\mu$ | The four values of the Clifford map, one set for both frames, the index always low; the arrays are displayed in §The Clifford Map |
| $\mathsf{K}$ | The Clifford map, a dictionary from the four directions of a frame into $M_4(\mathbb{C})$, the same in both frames, not a structure of $\mathbb{B}$; its values are displayed in §The Clifford Map |
Further Reading
- Conventions in the Biquaternion Universe, for the algebra, the two sectors and the coordinate $Q_t$.
- Operator and Calculus Conventions, for the calculus these frames read.
- Conventions of the Matrix Models, for the explicit arrays and the one set of gamma matrices.
- Physics Units and Common Elements Conventions, for the two writings of the temporal slot.
- Index and Notation Conventions, for the index rule.
- The Four Forms and the Four Algebraic Norms over the Biquaternion Algebra, for the interval, the plain weight and the other two norms.
- The Gamma Frame and the Complexified Dirac Algebra of $M_4(\mathbb{C})$, for the gamma matrices read as an object of their own.